Recent Blog Posts

5 Things to Consider When Installing the Tile Flooring 

If you decided to change your floors into the tile one, hold up yet because you still have things to consider before you install one. You should be particular to every detail because it will affect your daily routine. Checking up the foundation first is also a good idea, because if it shifted or moved, then you will have problems with installing your new floor system. For your foundation check-up and repair needs, call professionals of Watauga foundation repair.

Tile Flooring

Keeping the Baseboards or Not

First, consider if you’re keeping your baseboards or not. Most all of flooring types require a small gap between the wall and the floor’s edge to allow room for movement. If you won’t get rid of the baseboards, cover the gap with a convex molding. This will affect the appearance of the trim.

If you’re installing baseboards, you will not need the quarter round anymore. This will make sure that the appearance is not affected, so if you’re into the aesthetics that much you should go by this method. Also, most professionals prefer installing new baseboards.

Foundation Problems

If you have foundation problems, think again before you install that tile flooring system. If the foundation is already shifting, the floor will shift too. This will lead to breaks and cracks that will only cost you more to repair. If you have existing foundation problem, flexible floors like laminate or vinyl can handle such foundation shifts. Overtime, you will invest again in new floors because of the cracking.

If you have had your foundation checked and you’re all clear, you won’t experience tile cracking or breaking in the near future. Once the foundation is fine, your tile floor will be fine too.

Installing a Second Floor

If you’re installing second flooring on a structure that has a pier-and-beam construction, the tile flooring will require a waterproof subfloor. Once the wood is wet, it will swell and will lead to tile cracking and breaking. To avoid this from happening, install a cement board. If the area is large, it will cost you more especially if you hire a professional.

If you don’t install second flooring, you don’t need a subfloor. However, you will spend on added materials like baseboards, thin set, grout, quarter and many more.


We know that you only focus your attention to the floor installation, but professionals recommended painting any blemishes on the wall during the tile flooring installation. This way, you don’t want to worry about paint that splatters on your new floor. After the flooring installation, your walls might still get dirty anyway. If you don’t opt for this, create a touch-up plan if ever the walls get dirty.

Refinishing the Staircase

If you’re also installing tiles on your staircase, the challenge is how to finish the steps’ edges. The tile flooring has matching stair nose pieces available even though it’s too rare to find one. Other available options are metal finishing pieces but they will make the look too commercial. The bullnose blends better and is the common way to finish the edges.

Read More

Landscape Edging Materials for Landscape

Landscape edging is still important even though it is not the most obvious feature in your outdoor space.  To help you, here are some ideas and options for landscape edging materials. 


    Brick Edgings 

Brick in soil is one of the simplest and easiest to achieve of all the masonry edging projects, you can do it by yourself or you can also hire professionals such as Naperville brick paving company. Around the edge of a patio, bricks are laid in a narrow trench which can be made of concrete, pavers, or other materials.  

Bricks can be set vertically or angled to achieve a jagged or toothed look. By building a small underground footing that secures paving without visual support, an invisible edge can be treated. To conceal the footing, the paving is set into a cast concrete surface. 

    Wood Edgings 

The smartest choice for a long lasting edging, it is advantageous to pick wood that is resistant to weather, rot, and insects such as redwood or cedar. For patio or path endings, the most popular type is dimensional lumber. Flexible bender board is recommended for curves. 

    Concrete Edgings 

Concrete might be the way to go if you want to create a well-defined edging. Serves as a mowing strip next to a lawn as well as it helps retain paving. Concrete can be given some kind of finish or left smooth.  

    Stone Edgings 

You might want to consider using stone edgings such as flagstone, pebbles, rock, and boulders if you landscape style for a theme is natural, rustic, or Japanese. This is advisable to use in surrounding a patio, driveway, or a water feature.  

This will help unite the spaces and spread the materials consistently throughout the landscape. It is not advisable that you use loose rocks near a swimming pool. 

    Metal Edgings 

A steel or aluminum edging will be a wise choice if you want your patio to curve. It has the capability to curve because it is lightweight and sturdy yet pliable, they can also be bent or flexed into all sorts of shapes. They can be used with patio materials such as smaller pavers and loose materials as well as for lawns. 

You must always remember that aluminum is more lightweight compared to steel. From paving to surrounding areas, they are both sleek and provide a nearly seamless transition. It is insect resistant and rots proof making it ideal to use. 

    Plastic or Recycled Edgings 

Those made of plastic or recycled materials also are easy to manipulate and usually come in 4 inch deep strings like metal edgings. This might be the way to go if you prefer a color like black over metal. Another advantage of using plastic or recycled edging is that they are usually one of the least expensive options for edging. 

Plastic edgings are suitable for containing loose materials and can be used for children’s play area. They are also used together with brick or pavers. It is relatively easy to install, can be covered with soil or sod while creating a path or patio that has no visible edging. 

Read More

Building a Solid New Home Foundation

If you study the exterior or interior appearance of your house, the foundation is not visible. For most people, it seems though the foundation is non-existent. However, even though the foundation doesn’t scream “I’m here!” unlike the other components of our house that are obvious, we shouldn’t be mindless of it. After all, it’s the reason why our house is still standing still.  

Home Foundation 

The foundation and footings in our homes are like the legs and feet of our body, so without them we cannot go anywhere. The footings served as the anchor to the ground while the foundation carries the structure’s weight.  

Foundations are made from different materials, like block, concrete, stones and even treated woods. The process involves erecting the wooden forms, installing reinforcing bars, pouring the form with concrete and removing the form once the concrete dries.  

The types of foundation you should know about are crawl space foundation, full basement foundation and slab-on foundation. The experts of foundation repair in Mesquite will assess your location and recommend you one of the foundations mentioned.  

Crawlspace Foundation 

This type of foundation is common in the homes of Midwest and Southeast USA. Its footings are laid below the frost line and there’s a space between the floor frame and the ground for a crawling space. A foundation vent opening is added on most crawl spaces to avoid moisture buildup. This is because one of the disadvantages of a crawl space foundation is that it can be a breeding ground of moisture.  

Maintenance and regular check-up is important to make sure that the moisture and mold is not infesting in the crawl space because they can soak the framing and will lead it to rot which means that the house will suffer a structural failure.  

Full Basements Foundation  

Full basements are usually found in many areas but most especially in the Northeastern part. This foundation has a high wall (8 foot) that encloses a concrete slab (thick poured, 4 inches). The footings in this type of foundation are placed deep below the frost depth of the region. Before, basements are not finished. But now homeowners turn these areas into a gym, recreational area or entertainment center. If the slop is good, you will get the good ventilation and natural light in this space.  

However, if you opt to do so too, beneath the slab you should install rigid foam insulation. This will make the basement more comfortable. A proper insulation will prevent the walls and slabs from mold and mildew infestation.  


This type of foundation consists of concrete slab poured at the grade level. There are shallow footings installed that transfers the structure’s weight to the ground. This is commonly found in warm regions. When constructing one, rigid foam insulation is installed under the slab to make the area more comfortable. If you live in colder climate, there would be required installations of special frost proofing. Remember that your location, the soil condition and the weather are the important things to consider when choosing a type of foundation. And oh, don’t forget your budget.  

Read More

3 Crucial Reasons Why You Should Maintain the Health of Your Residential Roof

Your residential roof is considered as one of the most crucial parts of your house. This is the reason why it’s somehow confusing why a lot of homeowners tend to neglect as well as overlook the proper and regular maintenance of their residential roof. As a matter of fact, instead of waiting for a major problem to occur on your residential roofing, it is highly advisable that you perform regular and proper roof maintenance through asking a professional and dependable roof service provider in your area so they can inspect the condition of your residential roof. Aside from that, they will also perform any necessary roof service if needed and it includes roof repair and quality roof replacement.  


Most of the time, roof repair takes place when your roof has a leak and if the leak has already created a lot of damage to your roof, the professionals will suggest that you replace your entire roof since keeping a leaky and damaged residential roofing system will only create more damage not only to your roof but also to your house. Certainly, the last thing that you want to do is to spend a lot of money for costly emergency roof repairs. This is the reason why it really makes sense that you care for and maintain your residential roofing in a regular and proper manner, most preferably with the help of expert and professional roof service providers in your area. Below, you will find some most important reasons why keeping your residential roofing system in good condition is the best thing you can do to preserve the state of your roof as well as prevent any damage from taking place on your property.  

  1. Protection from Harsh Weather Conditions 

If your residential roofing system is not good, chances are that it will only leave your house prone to any considerable harsh weather damage. On the other hand, the moment your residential roof is maintained properly and regularly, it will be definitely more effective and efficient when it comes to protecting you and your family, as well as your house and entire residential property from any harsh weather and outside elements.  

  1. Desired Comfort and Energy Efficiency 

A healthy roofing system in your house can certainly give you better insulation as well as a good ventilation system that can help in keeping the indoor temperature of your home steady. As a matter of fact, this helps too much in keeping your house much more comfortable and cozy, and it can even help in lowering your energy consumption in the most efficient and effective manner. Therefore, it is highly recommended that you have your residential roofing system inspected and maintained regularly and properly with the help of professional and highly reliable residential roofing service providers in your area.   

  1. Prevent Serious Problems 

Through taking the time to care for and maintain the good condition of your residential roofing system, you can surely be able to reduce any chances of having potentially serious problems not only in your roof and property but to you and your family’s health, in the long run. Aside from that, regular and proper maintenance with the help of professionals can definitely help you avoid having costly repairs in the future.

Read More

Buying a Car: What to Know Before You Go

The auto industry is struggling, so car dealers will sell cars to stay on business. That makes now the best time to buy a car, the market is strong for you. You will get lucky to buy a car on a great, however it isn’t easy too. You need to become a savvy buyer first before you decide to buy one. The following are the things you should do to buy that car of yours.  


Know the Invoice Price 

Once you’ve determined what car you want to purchase, look up the invoice price. The invoice price is the amount the manufacturer sold the car to the dealer. The retail price of the dealers usually includes hundreds of dollars for their profit. Make sure you buy a car with a price close to its invoice price, except if you’re buying a very popular model. When you have this information before talking to the dealers mean that you expect a good deal from them.   

Check for Rebates 

You might be qualified for rebates which you don’t even know. You might have a membership to some organizations that entitles you to have additional rebates. This information is not sometimes made public, so make sure you check the manufacturer’s website. Some dealers won’t tell you that you qualify for some to keep them as additional profit.  

Research the Dealers 

Do not buy a car for the first visit of the first dealer you met. There are a lot of Lincoln dealers at Baton Rouge that you still have to look for. Buying a car from a fair dealer will save you money. Ask for references from the people you met around. Check for online reviews.  

Check Your Credit History 

Not all people pays one time for the car they purchase, some needs a loan. The amount of loan you’re going to get will depend on your credit history. Checking your credit history will give you an idea how much the dealers will give you. Get a copy of your credit card report and your credit score.  

Get Your Own Financing 

Car dealerships get most of it profit from its finance department. They have contract with banks to get the best rates available. You can get a car loan for 4.9% and draws up the finance contract at 5.9%. The dealer will get profit from that markup. Get a rate from your credit bank and present the rates to a salesman.  

Schedule Your Purchase 

If you’re not a picky buyer, you might get a good deal at the end of the year, where dealers will give you lower offers to clear up their inventory and qualify for manufacturer bonuses. December is a slow time for sales, so it’s a wise time to buy a car. Weekends have also slow sales too, you will likely to receive a good deal.  

Do Not Buy a Car on Your First Visit 

Your first visit to a dealer is the best time to test-drive the car. It’s good to gather information about the model you want, and the price they’re offering for it.  

Read More

Recent Comments